Vacuum flask

From Wikipedia, the free encyclopedia

  (Redirected from Dewar flask)

Jump to navigation Jump to search

Insulated storage vessel

"Thermos" redirects here. For the company, see Thermos LLC. For other uses, see Thermos (disambiguation).

This article is about the vacuum-insulated flask. For the flask used in filtration under vacuum, see Büchner flask.

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Vacuum flask" – news · newspapers · books · scholar · JSTOR (November 2011) (Learn how and when to remove this template message)

The typical design of a Thermos brand vacuum flask, used for maintaining the temperature of fluids such as coffee.

Laboratory Dewar flask, Deutsches Museum, Munich

Diagram of a vacuum flask

A cryogenic storage dewar of liquid nitrogen, used to supply a cryogenic freezer

A vacuum flask (also known as a Dewar flask, Dewar bottle or thermos) is an insulating storage vessel that greatly lengthens the time over which its contents remain hotter or cooler than the flask's surroundings. Invented by Sir James Dewar in 1892, the vacuum flask consists of two flasks, placed one within the other and joined at the neck. The gap between the two flasks is partially evacuated of air, creating a near-vacuum which significantly reduces heat transfer by conduction or convection.

Vacuum flasks are used domestically, to keep beverages hot or cold for extended periods of time, and for many purposes in industry.

Contents

• 1 History
• 2 Design
• 3 Research and industry
• 4 Safety
• 5 Thermodynamics
• 6 See also
• 7 References
• 8 Further reading
• 9 External links

History[edit]

Gustav Robert Paalen, Double Walled Vessel. Patent June 27, 1908, published July 13th 1909

The vacuum flask was designed and invented by Scottish scientist Sir James Dewar in 1892 as a result of his research in the field of cryogenics and is sometimes called a Dewar flask in his honour. While performing experiments in determining the specific heat of the element palladium, Dewar made a brass chamber that he enclosed in another chamber to keep the palladium at its desired temperature.^[1] He evacuated the air between the two chambers, creating a partial vacuum to keep the temperature of the contents stable. Through the need for this insulated container James Dewar created the vacuum flask, which became a significant tool for chemical experiments and also became a common household item. The flask was later developed using new materials such as glass and aluminum; however, Dewar refused to patent his invention.^[1]

Dewar's design was quickly transformed into a commercial item in 1904 as two German glassblowers, Reinhold Burger and Albert Aschenbrenner, discovered that it could be used to keep cold drinks cold and warm drinks warm and invented a more robust flask design, which was suited for everyday use.^[2][3] The Dewar flask design had never been patented but the German men who discovered the commercial use for the product named it Thermos, and subsequently claimed both the rights to the commercial product and the trademark to the name. In his subsequent attempt to claim the rights to the invention, Dewar instead lost a court case to the company.^[4] The manufacturing and performance of the Thermos bottle was significantly improved and refined by the Viennese inventor and merchant Gustav Robert Paalen, who designed various types for domestic use, which he also patented, and distributed widely, through the Thermos Bottle Companies in the United States, Canada and the UK, which bought licences for respective national markets. The American Thermos Bottle Company built up a mass production in Norwich, CT, which brought prices down and enabled the wide distribution of the product for at-home use.^[2] Over time, the company expanded the size, shapes and materials of these consumer products, primarily used for carrying coffee on the go and carrying liquids on camping trips to keep them either hot or cold. Eventually other manufacturers produced similar products for consumer use.

The name later became a genericized trademark after the term "thermos" became the household name for such a vacuum-insulated container for liquids.^[2] The vacuum flask went on to be used for many different types of scientific experiments and the commercial "Thermos" was transformed into a common item. Thermos remains a registered trademark in some countries, but it was declared a genericized trademark by court action in the United States in 1963, since it had become colloquially synonymous with vacuum flasks in general. However, there are other vacuum flasks.

Design[edit]

The vacuum flask consists of two vessels, one placed within the other and joined at the neck. The gap between the two vessels is partially evacuated of air, creating a partial-vacuum which reduces heat conduction or convection. Heat transfer by thermal radiation may be minimized by silvering flask surfaces facing the gap but can become problematic if the flask's contents or surroundings are very hot; hence vacuum flasks usually hold contents below the boiling point of water. Most heat transfer occurs through the neck and opening of the flask, where there is no vacuum. Vacuum flasks are usually made of metal, borosilicate glass, foam or plastic and have their opening stoppered with cork or polyethylene plastic. Vacuum flasks are often used as insulated shipping containers.

Extremely large or long vacuum flasks sometimes cannot fully support the inner flask from the neck alone, so additional support is provided by spacers between the interior and exterior shell. These spacers act as a thermal bridge and partially reduce the insulating properties of the flask around the area where the spacer contacts the interior surface.

Several technological applications, such as NMR and MRI machines, rely on the use of double vacuum flasks. These flasks have two vacuum sections. The inner flask contains liquid helium and the outer flask contains liquid nitrogen, with one vacuum section in between. The loss of precious helium is limited in this way.

Other improvements to the vacuum flask include the vapour-cooled radiation shield and the vapour-cooled neck,^[5] both of which help to reduce evaporation from the flask.

Research and industry[edit]

See also: Cryogenic storage dewar

In laboratories and industry, vacuum flasks are often used to hold liquefied gases (often LN2) for flash freezing, sample preparation and other processes where maintaining an extreme low temperature is desired. Larger vacuum flasks store liquids that become gaseous at well below ambient temperature, such as oxygen and nitrogen; in this case the leakage of heat into the extremely cold interior of the bottle results in a slow boiling-off of the liquid so that a narrow unstoppered opening, or a stoppered opening protected by a pressure relief valve, is necessary to prevent pressure from building up and eventually shattering the flask. The insulation of the vacuum flask results in a very slow "boil" and thus the contents remain liquid for long periods without refrigeration equipment.

Vacuum flasks have been used to house standard cells and ovenized Zener diodes, along with their printed circuit board, in precision voltage-regulating devices used as electrical standards. The flask helped with controlling the Zener temperature over a long time span and was used to reduce variations of the output voltage of the Zener standard owing to temperature fluctuation to within a few parts per million.

One notable use was by Guildline Instruments, of Canada, in their Transvolt, model 9154B, saturated standard cell, which is an electrical voltage standard. Here a silvered vacuum flask was encased in foam insulation and, using a large glass vacuum plug, held the saturated cell. The output of the device was 1.018 volts and was held to within a few parts per million.

The principle of the vacuum flask makes it ideal for storing certain types of rocket fuel, and NASA used it extensively in the propellant tanks of the Saturn launch vehicles in the 1960s and 1970s.^[6]

The design and shape of the Dewar flask was used as a model for optical experiments based on the idea that the shape of the two compartments with the space in between is similar to the way the light hits the eye.^[7] The vacuum flask has also been part of experiments using it as the capacitor of different chemicals in order to keep them at a consistent temperature.^[8]

The industrial Dewar flask is the base for a device used to passively insulate medical shipments.^[9][10] Most vaccines are sensitive to heat^[11][12] and require a cold chain system to keep them at stable, near freezing temperatures. The Arktek device uses eight one-litre ice blocks to hold vaccines at under 10 °C.^[13]

Safety[edit]

Vacuum flasks are at risk of implosion hazard, and glass vessels under vacuum, in particular, may shatter unexpectedly. Chips, scratches or cracks can be a starting point for dangerous vessel failure, especially when the vessel temperature changes rapidly (when hot or cold liquid is added). Proper preparation of the Dewar vacuum flask by tempering prior to use is advised to maintain and optimize the functioning of the unit. Glass vacuum flasks are usually fitted into a metal base with the cylinder contained in or coated with mesh, aluminum or plastic to aid in handling, protect it from physical damage, and contain fragments should they break.^{[citation needed]}

In addition, cryogenic storage dewars are usually pressurized, and they may explode if pressure relief valves are not used.

Thermodynamics[edit]

This section may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details. (February 2017) (Learn how and when to remove this template message)

The rate of heat (energy) loss through a vacuum flask can be analyzed thermodynamically, starting from the second T dS relation:^[14]

${\displaystyle {\begin{aligned}T\,dS&=dH-V\,dP\\T_{\text{surr}}\,\Delta S&=mc_{\mathrm {p} }\,\delta T-V\,dp\end{aligned}}}$

Assuming constant pressure throughout the process,

${\displaystyle T_{\text{surr}}\Delta S=c_{\mathrm {p} }\left(T_{\mathrm {b} '}-T_{\mathrm {c} }\right)}$

Rearranging the equation in terms of the temperature of the outside surface of the vacuum flask's inner wall,

${\displaystyle T_{\mathrm {b} '}=T_{\mathrm {c} }+{\frac {T_{\text{surr}}\Delta S}{c_{\mathrm {p} }}}}$

Where

• T_surr is the temperature of the surrounding air
• ΔS is the change in specific entropy of stainless steel
• c_p is the specific heat capacity of stainless steel
• T_c is the temperature of the liquid contained within the flask
• T_b′ is the temperature of the outside surface of the vacuum flask's inner wall

Now consider the general expression for heat loss due to radiation:

${\displaystyle Q'_{0}=A\varepsilon \sigma \left(T^{4}-T_{0}^{4}\right)}$

In the case of the vacuum flask,

${\displaystyle Q'_{0}=A_{\text{in}}\varepsilon _{\text{ss}}\sigma \left(T_{\mathrm {b} '}^{4}-T_{\text{surr}}^{4}\right)}$

Substituting our earlier expression for T_b′,

${\displaystyle Q'_{0}=A_{\text{in}}\varepsilon _{\text{ss}}\sigma \left(\left(T_{c}+{\frac {T_{\text{surr}}\Delta S}{c_{p}}}\right)^{4}-T_{\text{surr}}^{4}\right)}$

Where

• Q′₀ is the rate of heat transfer by radiation through the vacuum portion of the flask
• A_in is the surface area of the outside of the inner wall of the flask
• ε_ss is the emissivity of stainless steel
• σ is the Stefan–Boltzmann constant

Assuming that the outer surface of the inner wall and the inner surface of the outer wall of the vacuum flask are coated with polished silver to minimize heat loss due to radiation, we can say that the rate of heat absorption by the inner surface of the outer wall is equal to the absorptivity of polished silver times the heat radiated by the outer surface of the inner wall,

${\displaystyle \alpha Q'_{0}=Q'_{\text{in}}}$

In order for energy balance to be maintained, the heat lost through the outer surface of the outer wall must be equal to the heat absorbed by the inner surface of the outer wall,

${\displaystyle Q'_{\text{in}}=Q'_{\text{out}}}$

Since the absorptivity of polished silver is the same as its emissivity, we can write

${\displaystyle Q'_{\text{out}}=\varepsilon _{\text{ss}}Q'_{0}}$

We must also consider the rate of heat loss through the lid of the vacuum flask (assuming it is made of polypropylene, a common plastic) where there is no vacuum inside the material. In this area, the three heat transfer modes of conduction, convection, and radiation are present. Therefore, the rate of heat loss through the lid is,

${\displaystyle {\begin{aligned}Q'_{\text{lid}}&=Q'_{\text{cond}}+Q'_{\text{conv}}+Q'_{\text{rad}}\\&=kA_{\text{lid}}\left({\frac {T_{\mathrm {b} }-T_{\text{surr}}}{\Delta x}}\right)+hA_{\text{lid}}\left(T_{\mathrm {b} }-T_{\text{surr}}\right)+A_{\text{lid}}\varepsilon _{\text{pp}}\sigma \left(\left(T_{\mathrm {c} }+{\frac {T_{\text{surr}}\Delta S_{\text{pp}}}{c_{\mathrm {p} }^{\text{pp}}}}\right)^{4}-T_{\text{surr}}^{4}\right)\end{aligned}}}$

Where

• k is the thermal conductivity of air
• h is the convective heat transfer coefficient of free air
• ε_pp is the emissivity of polypropylene
• A_lid is the outer surface area of the lid
• c^pp
  _p is the specific heat capacity of polypropylene
• ΔS_pp is the specific entropy of polypropylene
• Δx is the distance over which conduction across the temperature gradient takes place

Now we have an expression for the total rate of heat loss, which is the sum of the rate of heat loss through the walls of the vacuum flask and the rate of heat loss through the lid,

${\displaystyle Q'_{\text{total}}=Q'_{\text{out}}+Q'_{\text{lid}}}$

where we substitute each of the expressions for each component into the equation.

The rate of entropy generation of this process can also be calculated, starting from entropy balance:

${\displaystyle \Delta S_{\text{system}}=S_{\text{in}}-S_{\text{out}}+S_{\text{gen}}}$

Written in rate form,

${\displaystyle \Delta S'_{\text{system}}=S'_{\text{in}}-S'_{\text{out}}+S'_{\text{gen}}}$

Assuming a steady-state process,

${\displaystyle {\begin{aligned}-\int {\frac {1}{T_{\text{surr}}}}\,dQ'+S'_{\text{gen}}&=0\\\Rightarrow S'_{\text{gen}}&={\frac {Q'_{2}-Q'_{1}}{T_{\text{surr}}}}\end{aligned}}}$

Since there is no heat added to the system,

${\displaystyle S'_{\text{gen}}={\frac {Q'_{\text{total}}}{T_{\text{surr}}}}}$

See also[edit]

• Hermetic seal
• Sunshield (JWST) (the layers of its thermal shield use a vacuum barrier to provide insulation)
• Tervis Tumbler

References[edit]

1. ^ ^{a b} Soulen, Robert (March 1996). "James Dewar, His Flask and Other Achievements". Physics Today. 49 (3): 32–37. Bibcode:1996PhT....49c..32S. doi:10.1063/1.881490.
2. ^ ^{a b c} "Our History". Thermos. 2011. Retrieved 31 March 2013.
3. ^ "James Dewar, the man who invented the thermos flask". BBC History. 2 April 2013. Archived from the original on 4 May 2014.
4. ^ Frank A. J. L. James. "Dewar, James - BRITISH CHEMIST AND PHYSICIST". Advameg, Inc. Retrieved 30 December 2010.
5. ^ "History of Cryogenics: A Cryo Central resource from the CSA". Cryogenicsociety.org. 2008-04-18. Retrieved 2012-11-29.
6. ^ Cortright, Edgar. "Apollo Expeditions to the Moon." Official NASA publications. 1975.
7. ^ Haynes, John; Scott, Jesse (1948). "A Method for Silvering a Dewar Flask for Optical Experiments". Science. 107 (2777): 301. Bibcode:1948Sci...107..301H. doi:10.1126/science.107.2777.301. PMID 17791184.
8. ^ Elliot, Willard (1970). "A Spectrophotometric Dewar Flask with Integral Light Shield". Public Health Reports. 85 (3): 276–279. doi:10.2307/4593845. JSTOR 4593845. PMC 2031665. PMID 4984895.
9. ^ Stinson, Liz (18 June 2013). "This Revolutionary Cooler Could Save Millions of Lives". WIRED.
10. ^ "Gates-backed device extends cold chain to rural areas". FierceVaccines.
11. ^ Murhekar MV, Dutta S, Kapoor AN, Bitragunta S, Dodum R, Ghosh P, Swamy KK, Mukhopadhyay K, Ningombam S, Parmar K, Ravishankar D, Singh B, Singh V, Sisodiya R, Subramanian R, Takum T (2013). "Frequent exposure to suboptimal temperatures in vaccine cold-chain system in India: results of temperature monitoring in 10 states". Bulletin of the World Health Organization. 91 (12): 906–13. doi:10.2471/BLT.13.119974. PMC 3845272. PMID 24347729.
12. ^ Samant Y, Lanjewar H, Parker D, Block L, Tomar GS, Stein B (2007). "Evaluation of the Cold-Chain for Oral Polio Vaccine in a Rural District of India". Public Health Reports. 122 (1): 112–21. doi:10.1177/003335490712200116. PMC 1802111. PMID 17236617.
13. ^ "Arktek Awarded Prequalified PQS Status by WHO" (Press release). ARKTEK. 2015-04-26.
14. ^ "Thermodynamics eBook: TdS Relations".

Further reading[edit]

• Burger, R., U.S. Patent 872,795 , "Double walled vessel with a space for a vacuum between the walls," December 3, 1907.
• Sella, Andrea (August 2008). "Dewar's Flask". Chemistry World: 75. Retrieved 2008-08-30.

External links[edit]

• Media related to Vacuum flasks at Wikimedia Commons

v t e Laboratory equipment
General Heaters Dryers Alcohol burner Bunsen burner Desiccator Heating mantle Hot plate Lab oven Kiln Meker–Fisher burner Striker Teclu burner Water bath Vacuum dry box Mixers Shakers Chemostat Homogenizer Liquid whistle Magnetic stirrer Mortar and pestle Shaker Sonicator Static mixer Stirring rod Vortex mixer Wash bottle Stands Clamps Holders Beaker clamp Clamp holder Tripod Burette clamp Extension clamp Flask clamp Funnel support Iron ring Pinch clamp Retort stand Screw clamp Test tube holder Test tube rack Wire gauze Lab drying rack Containers Storage Agar plate Cryogenic storage dewar Incubator Laminar flow cabinet Microtiter plate Petri dish Picotiter plate Refrigerator Weighing boat Weighing dish Other items Aspirator Autoclave Balance brush Cork borer Crucible Filter paper File Forceps Centrifuge Microscope Pipeclay triangle Spectrophotometer Splint Stopper Scoopula Spatula Test tube brush Wire brush Inoculation needle Inoculation loop
Glassware Apparatus Dean–Stark Soxhlet extractor Kipp's Bottles Boston round Condensers Cold finger Liebig Dishes Evaporating Petri Syracuse Watch glass Flasks Büchner Vacuum (Dewar) Erlenmeyer Fernbach Fleaker Florence Retort Round-bottom Schlenk Volumetric Funnels Büchner Hirsch Dropping Separatory Measuring devices Burette Conical measure Cuvette Eye dropper Eudiometer Graduated cylinder Ostwald viscometer Pipette Tubes Drying Cragie Nuclear magnetic resonance (NMR) Test Thiele Thistle Other items Beaker Bell jar Gas syringe Vial
Analytical chemistry Compositional AutoAnalyzer CHN analyzer Colorimeter Inductively coupled plasma (ICP) device Gas chromatograph (GC) Liquid Chromatograph (LC) Mass spectrometer (MS) pH indicator pH meter Microscopy Scanning electron microscope (SEM) Transmission electron microscope (TEM) Thermochemistry Calorimeter differential scanning Melting-point apparatus Thermometer Thermogravimetric analyzer (TGA) Other items Analytical balance Colony counter Spiral plater Nuclear magnetic resonance (NMR) instrument Plate reader
Electronics Ammeter Current source Function generator Galvanostat Multimeter Network analyzer Oscilloscope Pulse generator Potentiostat Spectrum analyzer Time-domain reflectometer Voltage source Voltmeter
Safety Personal protective equipment (PPE) Lab coat Face shield Respirator Rubber apron Safety shower Eye and hand Acid-resistant gloves Eyewash station Glove box Medical gloves Nitrile gloves Safety glasses Safety goggles Other items Acid (solvent) cabinet Biosafety cabinet Fire blanket Fire extinguisher Fume hood
Instruments used in medical laboratories

Authority control	GND: 4570412-0 LCCN: sh85037416 NDL: 00576015

Retrieved from "https://en.wikipedia.org/w/index.php?title=Vacuum_flask&oldid=984192226"

Categories:

• Vacuum flasks
• 1892 introductions
• Cryogenics
• Scottish inventions
• 19th-century inventions

Hidden categories:

• Articles with short description
• Short description matches Wikidata
• Articles needing additional references from November 2011
• All articles needing additional references
• All articles with unsourced statements
• Articles with unsourced statements from November 2018
• Wikipedia articles that are too technical from February 2017
• All articles that are too technical
• Commons category link is on Wikidata
• Wikipedia articles with GND identifiers
• Wikipedia articles with LCCN identifiers
• Wikipedia articles with NDL identifiers

Navigation menu

Personal tools

• Not logged in
• Talk
• Contributions
• Create account
• Log in

Namespaces

• Article
• Talk

Variants

Views

• Read
• Edit
• View history

More

Search

Navigation

• Main page
• Contents
• Current events
• Random article
• About Wikipedia
• Contact us
• Donate

Contribute

• Help
• Learn to edit
• Community portal
• Recent changes
• Upload file

Tools

• What links here
• Related changes
• Upload file
• Special pages
• Permanent link
• Page information
• Cite this page
• Wikidata item

Print/export

• Download as PDF
• Printable version

In other projects

• Wikimedia Commons

Languages

• العربية
• Asturianu
• Azərbaycanca
• বাংলা
• Bân-lâm-gú
• Беларуская
• Български
• Català
• Чӑвашла
• Čeština
• Dansk
• Deutsch
• Ελληνικά
• Español
• Esperanto
• Euskara
• فارسی
• Français
• Gaeilge
• Galego
• 한국어
• Հայերեն
• Bahasa Indonesia
• עברית
• Қазақша
• Lietuvių
• Монгол
• Nederlands
• 日本語
• Norsk bokmål
• Norsk nynorsk
• Polski
• Português
• Русский
• සිංහල
• Српски / srpski
• Suomi
• Svenska
• தமிழ்
• Türkçe
• Українська
• اردو
• Tiếng Việt
• Winaray
• 吴语
• 粵語
• 中文

Edit links

• This page was last edited on 18 October 2020, at 18:56 (UTC).
• Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

• Privacy policy
• About Wikipedia
• Disclaimers
• Contact Wikipedia
• Mobile view
• Developers
• Statistics
• Cookie statement

• 
•